This is what you get when you have Alaska Custom Splitboards split your board!
- Alaska Custom Splitboards recently partnered with Tri-Jet to offer the best cut possible using a waterjet. Waterjets offer a very strait cut all while removing the smallest amount of material resulting in an even tighter board with a very clean look!
- Cut sidewall routed and steel edges inlayed using a flexible eco friendly resin with a finished sidewall just like a factory board.
- Exposed sidewall coated with a flexible sealant which keeps intrusive moisture from the very dry and thirsty wood core, plus add your choice of color (colors limited) to add that personal touch.
- Chinese hooks and tip and tail clips are installed tight to keep your board perfectly together while on the down.
- Either universal or standard pucks will be installed to your specifications.
- Every boards gets a hand tune, , edges sharpened and base waxed with an all natural 100% earth friendly wax .
Quiver Killers-
Quiver killers were first introduced to the ski world a few years ago allowing skiers to change bindings within a quiver, eliminating the need for bindings for each ski. We've taken this technology and used it to eliminate the ten extra holes normally required for the touring area of your board. We'll use this technology when your board is thick enough to accommodate the inserts! If you don't want to use this technology please let us know!
Quiver killers were first introduced to the ski world a few years ago allowing skiers to change bindings within a quiver, eliminating the need for bindings for each ski. We've taken this technology and used it to eliminate the ten extra holes normally required for the touring area of your board. We'll use this technology when your board is thick enough to accommodate the inserts! If you don't want to use this technology please let us know!
The Packages
Our packages are the most popular, if you had something else in mind, please use our contact page and let us know what you're thinking!
For those of you who don't live in the Valley I can meet you half way most nights and every so often, I make it into Anchorage, just drop me a line and we can work out something!
For those of you who don't live in the Valley I can meet you half way most nights and every so often, I make it into Anchorage, just drop me a line and we can work out something!
Deluxe Package-
This package includes everything!
We cut your board with precision using a high tech waterjet, inlay a metal edge, seal sidewall to prevent moisture damage and install universal pucks for limitless stance options. $485 skins extra Deluxe with mini edge-
This is the same as the Deluxe Package, except instead of having an edge run continuous from tip to tail, we'll install the edge centered underfoot about 18 inches on either side. $450 skins extra
Waterjet cut and inside edge-Are you crafty but don't have a way to cut your board? We'll cut your board and install a full length or 'mini' edge that's will be perfecty flush ready for hardware. If you need hardware let us know! Mini edge- $175 Full edge- $205
|
Mini Deluxe-
Everything the deluxe offers except instead of universal pucks, you'll get standard pucks set to your preferred stance. (This is the strongest option, less holes is a good thing!) $450 skins extra
Super Basic Package-
The basics here, no inside edge or universal pucks. You do get a perfectly split board and hardware installed with love, sounds great huh? $310 (includes voile kit) skins extra
Waterjet cut-This is just for the cut- Great option if you don't want an inside edge but have all the tools and the steady hands to install all the hardware. $65-
|
Package add on
Extra Inserts- $8 ea-
For each additional insert.
Splitboard skin tail attachement $40-
This is great add on to your voile or black diamond skins. Same tail attachment as the popular G3 skins.
|
Karakoram Clips- $50-
This is a great way to improve performance on your custom splitboard!
|
Disclaimer
We do our best at Alaska Custom Splitboards to return a perfect product, however some unforeseen problems do arise that's beyond our control, for example: Our jigs are set up to cut a perfectly strait line through a wood core snowboard. Some snowboards have foreign materials in the core that either throws off the cut or when cut the boards flex is jeopardized, it's imposable to know what ALL boards are made of, it the responsibility of the snowboard owner to contact the snowboard manufacturer if the board is suspect. Alaska Custom splitboards will not be responsible for a board that is miss cut due to foreign core materials! If something happens that is within our control, we'll do whatever we can to make things right!
